Tank Roof Coatings
An agricultural customer came to us needing their tank roofs refurbished. We removed loose paint/rust and applied a spot prime coating. We then applied epoxy rust inhibiting primer, polyurea sealant to all bin protrusions on the rooftop, and finished with a white exterior acrylic topcoat.By doing so, this will prevent rust and further leaks, reduce […]
Bevel Gears
Northend Gear & Machine Division manufactured a few bevel gears for a contracting customer in Kentucky. The gears were cut on our Gleason machine, which is great at ensuring repeatable high quality standards. View the pictures attached below to see the process and precision in the outcome. Northend Gear & Machine was acquired in 2021 by […]
Tank Refurbishment
Look at that glow! This tank received some repair work, a polyurethane overcoat to the tank exterior, and a novolac epoxy liner to the tank interior and the containment area. Thanks to our field coatings team, it’s as good as new! View other Field Coating Projects & See The Team’s Full Capabilities at the Following Link: […]
Manufactured Sheave
In July, a fabrication customer in Tennessee needed a Sheave made new. We fabricated it at our Custom Fabrication facility in Poseyville, IN. The sheave was then sent over to our Machining facility in Princeton, IN and we utilized our new Tacchi Lathe machine to complete the project.
Exterior Metal Building Rehabilitation
Our Field Coatings Division performed an exterior metal building rehabilitation for a local power generating station. They battled the elements in order to power clean and degrease over 50k sq. ft. of exterior sheeting, replaced or overlaid several panels, then applied 4 to 7 mils of an acrylic exterior coating. This will allow the customer to […]
Power Generation Trommel Screen
Our NIX Repairs & Maintenance Division designed a trommel screen to match an existing design. A 3/8″ flat plate was cut and rolled to diameter. Two flanges were burnt out with the inside dimension to match the outside dimension of the rolled plate. Our team then took the project to fit the rolled plate to the […]
Manufactured Gear
Our capabilities include all tooth forms reverse engineered to specification. We manufacture new from solid, fabricate ring gears, or cut teeth only projects.
Custom Davit Crane Project
The team at Nix Metals designed and fabricated this Davit Crane for a customer on the West Coast. The crane was fabricated in Poseyville and then shipped to Santa Clara, California. Tony Shell traveled to California to install the crane for our customer. The customer needed a safe way for their team to access and […]
Roof Refurbishment
Nix Mobile Coatings had a customer concerned with replacement of a leaking roofs at their facilities. To save the customer costs an overcoat system was chosen to reduce tear off expenses. The roof was pressure cleaned and deoxidized. Some sections of the failing roof were cut out and overlaid with decking. Approximately 1 inch of closed cell spray foam […]
Custom Fabricated Stands-Reverse Engineering
The team at Nix worked with a customer to reverse engineer stands that needed replacement at their facilities. The engineering team worked with the customer to engineer the stands so that our fabrication team could make them to the customer specifications. The stands then went to the Shop Coatings Division for final prep and paint. […]