Acid Pit Dike Coating
Our field coatings team recently completed a critical repair project of an acid pit dike. The area around the drain had been experiencing issues with failing coatings, which posed a risk for potential damage and contamination. Scope of Work: Surface Cleaning: The first step involved thoroughly cleaning the affected area to remove any deteriorated coating, […]
Concrete Silos Coating
Here’s a detailed look at the scope of work for our concrete silos project: Pressure Washing the Surfaces: Scope: We thoroughly cleaned the exterior and interior surfaces of the silos.Why: Removing dirt, grease, and old coatings is crucial for ensuring that the new coatings adhere properly. A clean surface prevents issues like peeling or poor […]
Industrial Plant Tank Pad Coating
Beginning with surface preparation, we shotblasted the concrete to a Concrete Surface Profile (CSP) of 4-6, providing an optimal foundation for the coatings. Following this, we applied a scratch coat of Sika 24, enhancing adhesion and substrate resilience. The next step involved the application of a urethane cement slurry, combined with a sand broadcast for […]
Roof Restoration and Coating
In this project, we pressure washed and cleaned over 40,000 square feet of a facility’s roof, soffits, gutters, and downspouts. To ensure long-lasting protection, we applied a 3-coat industrial coating system comprising epoxy, urethane, and fluoropolymer layers. This system enhances durability, weather resistance, and UV protection, safeguarding the facility’s structure while minimizing maintenance needs. The […]
Fuel Tank Refurbishment
A customer within the transportation industry had a tank needing a complete refurbishment. Due to the existing coating being lead based, our team applied Enviroprep to treat the spent media/coatings, so they were at an acceptable level for disposal. We abrasive blasted the tank exterior per SSPC-SP 10 (near white metal blast), applied 1 coat […]
Tank Roof Coatings
An agricultural customer came to us needing their tank roofs refurbished. We removed loose paint/rust and applied a spot prime coating. We then applied epoxy rust inhibiting primer, polyurea sealant to all bin protrusions on the rooftop, and finished with a white exterior acrylic topcoat.By doing so, this will prevent rust and further leaks, reduce […]
Osage U.S. Coast Guard
Our Field Coatings Team refurbished the Osage, a U.S. Coast Guard barge located in Owensboro, KY. The existing coating system was aged and beginning to rust and fade. We followed the USCG specifications to abrasive blast to remove existing coatings on the hull, freeboard, and underwater body. We also blasted and coated the sewage and […]
Tank Refurbishment
Look at that glow! This tank received some repair work, a polyurethane overcoat to the tank exterior, and a novolac epoxy liner to the tank interior and the containment area. Thanks to our field coatings team, it’s as good as new! View other Field Coating Projects & See The Team’s Full Capabilities at the Following Link: […]
Exterior Metal Building Rehabilitation
Our Field Coatings Division performed an exterior metal building rehabilitation for a local power generating station. They battled the elements in order to power clean and degrease over 50k sq. ft. of exterior sheeting, replaced or overlaid several panels, then applied 4 to 7 mils of an acrylic exterior coating. This will allow the customer to […]
Restoration of Local Historic Covered Bridges
Our Field Coatings division restored two local historical landmarks: the Old Red Covered Bridge and the Wheeling Covered Bridge in Gibson County. We were tasked by the Gibson County Economic Development Corporation with power washing the inside and outside of each bridge, to remove loose paint, rotted wood, dirt, debris, etc. We then sprayed and back-rolled 2 coats of […]