Osage U.S. Coast Guard
Our Field Coatings Team refurbished the Osage, a U.S. Coast Guard barge located in Owensboro, KY. The existing coating system was aged and beginning to rust and fade. We followed the USCG specifications to abrasive blast to remove existing coatings on the hull, freeboard, and underwater body. We also blasted and coated the sewage and […]
Bevel Gears
Northend Gear & Machine Division manufactured a few bevel gears for a contracting customer in Kentucky. The gears were cut on our Gleason machine, which is great at ensuring repeatable high quality standards. View the pictures attached below to see the process and precision in the outcome. Northend Gear & Machine was acquired in 2021 by […]
Damaged Tanker Refurbishment
Recently, our Repairs & Maintenance Division refurbished this damaged tanker. The team inspected the unit to find all damaged areas. The main work consisted of rolling and fabricating new tank panels which were then fully welded. After the repairs were complete, which included a new catwalk and pipe work, the tank was pressurized to ensure […]
Frame Machining
A fabrication customer needed some work done on frame parts for a roller coaster that was going overseas. We milled, drilled and tapped holes into the parts. There were two of these bases and each was 40 foot long, weighing 20,000 lbs! Check out our Machining Division’s key assets & services by clicking on the division […]
Tank Refurbishment
Look at that glow! This tank received some repair work, a polyurethane overcoat to the tank exterior, and a novolac epoxy liner to the tank interior and the containment area. Thanks to our field coatings team, it’s as good as new! View other Field Coating Projects & See The Team’s Full Capabilities at the Following Link: […]
Manufactured Sheave
In July, a fabrication customer in Tennessee needed a Sheave made new. We fabricated it at our Custom Fabrication facility in Poseyville, IN. The sheave was then sent over to our Machining facility in Princeton, IN and we utilized our new Tacchi Lathe machine to complete the project.
Roof Access Caged Ladder
A heavy industrial customer was in need of a reliable and secure means of accessing their roof. We designed a custom height, steel ladder with a safety cage. In order to maximize visibility and promote safety awareness, we opted for a vibrant powder coated safety yellow finish. Now the employees can access the roof for […]
Pipe Supports
In June, a contractor came to us needing a new system for their manufacturing customer to protect and hold pipes in place going from one building to the next. Our engineering, structural fabrication, and field services teams worked together to design, build, and install a galvanized steel bridge to support the pipes.
Exterior Metal Building Rehabilitation
Our Field Coatings Division performed an exterior metal building rehabilitation for a local power generating station. They battled the elements in order to power clean and degrease over 50k sq. ft. of exterior sheeting, replaced or overlaid several panels, then applied 4 to 7 mils of an acrylic exterior coating. This will allow the customer to […]
Power Generation Trommel Screen
Our NIX Repairs & Maintenance Division designed a trommel screen to match an existing design. A 3/8″ flat plate was cut and rolled to diameter. Two flanges were burnt out with the inside dimension to match the outside dimension of the rolled plate. Our team then took the project to fit the rolled plate to the […]